Loop station on PC: build loops with a keyboard and a mic
A loop station records a few bars, plays them back in a circle and lets you add the next layer on top. Beatboxers and street musicians use a pedal for it. If all you want is to stack a beat, a bassline and your voice into a short loop — for a stream intro, a jingle or just for fun — the PC in front of you can do it. Here's how, and where the dedicated tools are better.
What a loop station needs
- A tempo and a loop length, so every layer lines up.
- A count-in, so you can come in on the one.
- Overdubbing: each pass adds a layer while the earlier ones keep playing.
- Mute per layer, because the third take is never the good one.
- A way to keep the result.
The setup in SoundLord's Mixer
SoundLord is a soundboard first, but its Mixer tab is built around exactly this loop. It has ten audio lanes, one lane for microphone takes and one for a playable instrument, on a beat grid with a metronome.
- Set the tempo. Type in the BPM. If you're building on an existing sound, measure it first — the free BPM tapper does it in ten taps.
- Lay down the foundation. Drag sounds from your library onto the lanes: a kick, a clap, a sample. The loop cloner repeats a clip at a fixed interval, locked to the grid, so one kick becomes a four-on-the-floor pattern in two clicks.
- Add an instrument. Switch on Use Piano and play one of 45 sampled instruments on your computer keyboard, from 808 bass to tenor sax. What you play is recorded as notes, not audio, so you can fix a wrong note or change the instrument afterwards.
- Record your voice. Switch on Mic Rec and press play. The count-in gives you up to four bars; every pass of the loop lands as its own take.
- Sort it out. Every lane has mute, solo and volume, and they work while the loop is running. Cut clips, move them, delete the takes that didn't work.
- Keep it. Save as Sound renders the whole loop into one clip in your library. Put it on a key and it's a jingle you made yourself.
What you need
A Windows PC, any microphone, and headphones. Use headphones while recording: with speakers, the microphone picks up the loop again on every pass and the mix turns to mud. A second keyboard is optional, but it's the comfortable way to keep sounds and instrument apart — setup here.
Where a pedal or a DAW is the better tool
| Looper pedal | DAW (Ableton, FL Studio, Reaper) | SoundLord Mixer | |
|---|---|---|---|
| Made for | Live performance, hands-free | Producing full songs | Short loops, jingles, stream sounds |
| Foot control | Yes | With extra hardware | No |
| Guitar or instrument input | Yes | Yes, with an audio interface | Microphone input only |
| Plugins (VST) | No | Yes | No |
| Learning curve | Low | High | Low |
| Result lands on a soundboard key | No | Export, then import | One click |
If you perform with a guitar and need your hands free, buy a pedal. If you want to produce and release music, learn a DAW; Reaper has a generous trial and Ableton Live Lite ships with a lot of hardware. The Mixer sits below both on purpose: it's for the loop you want in ten minutes, without learning an audio workstation, and it puts the result straight onto a key.
More on making your own clips, from trimming to layering, is in make your own soundboard sounds.
Get SoundLord →